|
ENGINE ACCESSORIES
Home / Accueil |
|
|
|
HARDWARE |
ALUMINIUM CONICAL WASHERS /
RONDELLES CONIQUES EN ALUMINIUM
33mm x 8mm,
used for seat mounting
Red, Blue, Black, Gold, or Gun Metal
22mm x 8mm,
used for chassis
Red, Blue, Black, Gold or Gun Metal
20mm x 6mm,
used for bodywork
Red, Blue, Black, Gold or Gun Metal
18mm x 6mm,
used for floor pan
Red, Blue, Balck, Gold or Gun Met |
 |
CONICALWASHER-33 CONICALWASHER-22
CONICALWASHER-20
CONICALWASHER-18 |
$2.50 $1.75
$1.75
$1.75 |
|
STEERING WHEEL &
COMPONENT |
|
Aluminum Wheel
Spacers for 17mm Spindles
these work on any racing kart
using 17mm Front Spindles: CRG, Arrow, Birel, Tony Kart, Haase, etc..
17mm x 5mm ,
black color
17mm x 10mm, black & silver color |
 |
SPACERW17-5 SPACERW17-10 |
$1.50 $1.50 |
|
TIE ROD ENDS / ROTULES DE BARRE DE
CONDUITE
Left Hand Threaded w/Jam Nut and Right Hand
Threaded w/Jam Nut. Chrome Plated 8mm Heim Joint
Tie Rod Ends with Jam Nuts.
|
 |
TIERODENDS-KM-LH TIERODENDS-KM-RH |
$10.00 $10.00 |
PRO SERIESTIE RODS / BARRE DE
CONDUITE SÉRIE PRO
Machined Aluminum,
8mm Threaded Ends, Anodized Gun Metal Color
Sizes Available :
195mm, 200mm, 205mm, 210mm, 215mm, 220mm, 225mm, 230mm, 235mm,
240mm, 245mm, 250mm, 255mm, 260mm, 265mm, 270mm, 275mm, 280mm, 285mm |
 |
PROTIEROD-KM |
$20.00 |
TIE RODS / BARRE DE CONDUITE
Aluminum Hex, 8mm
Threaded Ends, Black, Red, Blue, Gold or Titanium
Sizes Available :
195mm, 200mm, 205mm, 210mm, 215mm, 220mm, 225mm, 230mm, 235mm, 240mm,
245mm, 250mm, 255mm,
260mm, 265mm, 270mm, 275mm, 280mm, 285mm |
 |
TIEROD-KM |
$15.00 |
|
STEERING WHEELS / VOLANT
Racing Go Kart Steering Wheels
High Quality Dyed
Suede Leather with Black Rubber Grip area.
Aircraft Quality Aluminum Spoke and Hoop.
13” diameter
Available color, Red, Black, Blue |
 |
STEARING-KM
|
$90.00 |
|
SPROCKETS &
CHAINS, CHAIN GAURDS |
RLV XTREME DRIVE CHAIN #35 /
CHAINE RLV EXTREME #35
Xtreme Chain is 10%
lighter than the leading imported chain. This weight reduction equals
less rolling resistance and faster acceleration. Has a tensile
strenghth in excess of 2.300 psi. Pre-lubricated and pre-stretched.
This is a 104 link length chain. |
 |
RLVCHAIN-PE |
$40.00 |
REAR SPLIT GEAR SPROCKET #35 /
PIGNON ARRIÈRE 2 PARTIES #35
A high quality long life
Billet Aluminum
rear split sprocket gear. Precision CNC machined,
light weight, Red anodized, fits #35 chain.
Size available #57,
#58, #59, #60, #61, #62, #63, #64
|
 |
SPROCKET-BM |
$27.50 |
|
CHAIN & HEADER GUARD (BURN PROTECTION),
(Design may vary from picture) |
 |
DLXCHAINGAURD |
$24.00 |
|
Chain and clutch guard chrome |
 |
NRC-GC |
$12.00 |
|
Nylon chain guard, about 24'' |
 |
NRC-NCG |
$7.00 |
|
CHAIN GUARD, ALL MOTORS
(color and shape may vary from picture) |
 |
AP1785 |
$16.50 |
|
FLYWHEEL SCREEN - Fits Hondas and Clones. Reduces Air Flow and protects fan/flywheel
(Hole pattern may differ from picture) |
 |
|
Blue - Plastic |
$9.75 |
|
Red - Aluminum |
$18.00 |
|
Blue - Aluminum |
$18.00 |
|
Black - Aluminum |
$18.00 |
|
Yellow - Aluminum |
$18.00 |
|
|
|
ENGINES HUBS |
|
HUB, ENGINE ALUMINUM |
 |
QM1011 |
$27.75 |
|
HUB, ENGINE STEEL |
 |
QM1011S |
$42.00 |
|
HUB, ENGINE TITANIUM |
 |
QM1011T |
$114.00 |
|
|
|
MOTOR PLATES &
MOUNTING HARDWARE |
MOTOR BOLT KIT, Grade 8 motor plate bolt kit. Top quality hardware
|
 |
QM1053-3 |
$35.00 |
|
|
|
FUEL PUMPS, LINES,
AND RELATED |
|
FUEL PUMP, Mikuni, Pulse Operated, Metal Housing, Use for Gas applications |
 |
MIKFPUMP |
$26.00 |
|
FUEL PUMP, Walbro, Pulse Operated, Plastic Housing, Use for Alky
applications |
 |
WALFPUMP |
$28.00 |
|
FUEL PUMP, Mikuni, Pulse Operated, Plastic Housing |
 |
80077833 |
$25.00 |
|
PULSE FITTING, SCREW IN - Billet aluminum pulse fitting, provides a
crankcase pulse to operate the fuel pump. Screws into the top oil fill area
of the side cover. |
 |
SM-APF |
$13.00 |
|
FUEL LINE (Color may vary), Price per foot |
 |
FUELLINE |
$1.50 |
|
MOUNTING PLATE FOR FUEL PUMP (Note: Must drill holes to install) |
 |
FPPLATE |
$12.00 |
|
FUEL PUMP PACKAGE, Includes Mounting Plate, Fuel Pump, Screw in Pulse
Fitting, Fuel Line, and mounting hardware |
|
FPPACKAGE |
$52.00 |
|
JET BLOCK -
for Clone
and Honda engines provides racers with an easy and economical way to keep up
with jets and jet changes.
Made from Billet Aluminum, the new Jet Bock is CNC machined and is very
handy. |
 |
JET BLOCK |
$13.00 |
|
JET BLOCK with 7 drilled Jets |
$45.50 |
|
JET BLOCK with 7 OEM Honda Jets |
$58.50 |
|
|
|
STARTERS |
|
STARTER, Hand Held, Complete with Battery. THE BEST
HANDHELD STARTER AVAILABLE (may vary from picture) |
 |
QM1071 |
$311.00 |
|
|
|
TACHS & GAUGES |
|
Narrow Band
Air Fuel Gauge
Specifically made for carb tuning on small 4 stroke engines. Highly visible
LCD digital display in a compact size. Internal battery lets you move meter
from sled to sled without messing with power wires; can also be hardwired
into power source (backlighting requires hardwiring). Display range:
12.1-16.8. Measures 2 3/8 in. W x 1 5/16 in. H x 5/8 in. D. Includes O2
sensor. |
|
AF Guage |
$245.00 |
|
TACHS & GAUGES TACH with Memory |
 |
TACH |
$99.00 |
|
|
|
THROTTLE LINKAGES |
|
NR THROTTLE LINKAGE, W/BEARING, CNC manufactured from
billet aluminum. Includes all parts needed for installation.
The best and most
complete throttle linkage available. Will not work with stock
tank.
Now with throttle blade opening adjustment. Allows adjustment of throttle
opening to maximize flow. This is especially useful when using
restrictor plates. |
|
NRTLBR |
$55.00 |
|
THROTTLE LINKAGE, HUNTER
CNC Linkage, Similar to the above linkage but without the throttle
adjustment screw. Will not work with stock tank. |
 |
HUNTL |
$49.00 |
|
THROTTLE LINKAGE, TANNER (Same as Hunter but uses bushing, not recommended
for dirt tracks, Complete with all parts needed). Will not work with stock
tank. |
 |
TANTL |
$60.00 |
|
THROTTLE LINKAGE, QUICK AND EASY. Note: You must use stock Governor arm.
Will not work with stock tank. |
 |
NRTL |
$18.00 |
|
ARC Throttle Kit -
CNC machined from 1/8" aluminum plate.
All the parts for the throttle mechanism that do not come with an engine are
included (cable and jacket sold separately). The throttle mechanism
maximizes the travel at the foot pedal giving you more precise throttle
control. The plate is pre-drilled to accept the Mikuni fuel pump as pictured
here (sold separately) so the pump will accept the existing fuel hose
provided with the engine. Does not include cable |
 |
ARCTLKITYL
For Yellow Clones and Hondas |
$30.00 |
|
ARCTLKITBL
For Blue Clones |
$30.00 |
|
ARC Linkage Kit with Fuel Pump add-on. Same
as above but adds Mikuni Fuel Pump, pulse fitting, and 5 ft fuel line. |
ARCLINKFPY
For Yellow Clones and Hondas |
$58.00 |
|
ARCLINKFPY
For Blue Clones |
$58.00 |
|
THROTTLE WHEEL - Precision machined from
solid, Aircraft Grade, aluminum billet, Replaces the fragile plastic stock
part, Incorporates integral torsion return spring, Enables simple and
precise setting of full throttle butterfly position Incorporates easy
attachment of throttle cable, Complies with ASN technical regulations. Kit
includes the Adapter, Throttle Spindle, Torsion Spring, Set Screw, and
Installation Instructions. (Specify Honda GX-160 or Honda GX-200). Color may
vary.
NOTE: Can be used on Carbs with broken throttles (Black Plastic Piece)
|
 |
GX160 Throttle Wheel |
$72.00 |
|
GX200 Throttle Wheel |
$72.00 |
|
THROTTLE CABLE, TEFLON COATED, BARREL END |
 |
BLKTHCABLE |
$8.50 |
|
THROTTLE CABLE, STAINLESS STEEL, NYLON COATED, BARREL END |
 |
SILTHCABLE |
$4.00 |
|
THROTTLE CABLE, STAINLESS STEEL, NYLON COATED, BALL (for Mikunis, some
grinding may be needed) |
|
SILTHCABLEBALL |
$6.00 |
|
Part/Model numbers are for
reference only and are subject to change. Actual part may have a different
number, however it will be latest available part and will match description.
If you require an exact part number (i.e. for class or rule requirements),
please e-mail. |
|
Parts Descriptions followed by
an * are special order and may take 3 to 7 days to get. |