HOP UP KITS / ENSEMBLES DE PERFORMANCE
 5.5, 6.5 CLONES & HONDAS

STAGE 1 KITS                           STAGE 2 KITS                        STAGE 3 KITS

 

STAGE 4 KITS                                GX120 KITS                                   GX270 KITS 
 
BOLT ON HOP UP KITS FOR GX160, GX200, and CLONES

Kits are 100% Complete with all parts needed (Engine not Included).  All kits require Aftermarket Exhaust and/or Header to work properly. Exhaust is not included and must be ordered separate.  Horsepower ratings are for reference only and assumed tuned exhaust. Actual HP may be different.

   STAGE 1 KIT

Basic kit for improving the performance of GX160, 200s, and Clones. Simple to install, you can expect significant performance increases.

Kit de base pour améliorer la performance des GX160, 200, et des clones. Simple à installer, vous pouvez s'attendre à une augmentation significative des performances.

Stage 1 Kit  $103

Includes

  • Race/Open Air Filter & Adapter,

  • Honda Jet for application,

  • Rev Kit w/18 lb Springs,

  • 8 degree Timing Key,

  • Small Fan,

  • Valve Cover Gasket.

  • Thin Head Gasket (160 Kits only)

  • optional Header/Exhaust,

Approx 7.5 hp for 160s

Approx 9.0 hp for 6.5s and GX200s

Approximativement 9 hp pour 6.5s et GX200s

 STAGE 1 HOP KIT ORDER FORM

 

Select Options below and click button to add to shopping cart

Select Engine Type

Honda GX200 or yellow Clone $103

  Blue Clone $103

Honda GX160 $116

 

Select Carburator

 
GX200 Bored - gas $0

GX200 Bored - Methanol +$26

 

 

Select Misc Options
 Add Header $26
Add Muffler & Clamp $46
      

Total Cost        

   STAGE 2 KIT

For those looking to get the maximum performance without opening up the case, we offer our stage 2 kit. Where possible, we only use genuine Honda components to improve reliability and power. Same as our stage 1 kit but with the addition of a bored carb and 1.3 rockers arms to produce a solid 10 hp on GX200s.

Pour ceux qui cherchent à obtenir le rendement maximum, sans ouvrir le boîtier, nous offrons notre stade 2 kit. Lorsque cela est possible, nous n'utilisons que des pièces d'origine Honda pour améliorer la fiabilité et la puissance. Même que notre scène 1 kit mais avec l'ajout du percage du carburateur et des ratio rockers 1,3  pour produire un solide 10 ch sur GX200s.

Stage 2 Kit  $207

Includes

  • Race/Open Air Filter & Adapter,

  • Bored GX200 Carb

  • 1.3 Rocker Arms

  • Rev Kit w/18 lb Springs,

  • 8 degree Timing Key,

  • Small Fan,

  • Valve Cover Gasket.

  • Thin Head Gasket (160 Kits only)

  • Carb gasket

  • Guide Plate

  • optional Header/Exhaust,

Approx 8.5 hp for 160s

Approx 10.0 hp for 6.5s and GX200s 

Approximativement 10 hp pour 6.5s et GX200s

   STAGE 2 HOP KIT ORDER FORM

Select Options below and click button to add to shopping cart

Select Engine Type

Honda GX200 or yellow Clone $207

  Blue Clone $207

Honda GX160 $220

 

Select Carburator

 
GX200 Bored - gas $0

GX200 Bored - Methanol +$26

 

 

Select Misc Options
 Add Header $26
Add Muffler & Clamp $46
      

Total Cost        

STAGE 3 KIT
Now you are getting serious. A set-up from Stage 2 kit, we add a cam and a choice of carburetors. A billet rod and all need gaskets are also included. GX200 (6.5 Clone) HP will range between 11 and 14 depending on cam/carb selected.

Maintenant, vous êtes devenu sérieux. Un set-up de la phase du kit 2, nous ajoutons une came et un choix de carburateurs. Une tige de billettes et de tous les joints doivent sont également inclus. GX200 (6,5 Clone) HP se situera entre 11hp et 14hp en fonction de came / carb sélectionné.

Stage 3 Kit  $349

Includes

  • Race/Open Air Filter & Adapter,

  • Choice of Bored GX200 , 390 , or 22mm Carb

  • 275 Dyno, CL1, or NR230U/252U Cam

  • Rev Kit w/18 lb Springs,

  • 8 degree Timing Key,

  • Small Fan,

  • Valve Cover Gasket.

  • Carb gasket

  • Thin Head Gasket (160 Kits only)

  • Billet Rod (not shown in picture)

  • Case Gasket

  • optional Header/Exhaust

  • Billet Guide plate

  • 1.3 Rockers Arms (not included with Dyno 275 cam - use stock arms)

Approx 12 hp for 160s

Up to 14 hp for 6.5s and GX200s 

Jusqu'à 14 hp tout dépendant des combinaisons pour 6.5s et GX200s

 

 STAGE 3 HOP KIT ORDER FORM

Select Options below and click button to add to shopping cart

Select Engine Type

Honda GX200 or yellow Clone $349

  Blue Clone $349

Honda GX160 $363

 

Select Camshaft

GX200 Bored - gas $0
GX200 Bored - Methanol +$26
GX390 - Gas +$39

GX390 - Methanol +$52

22mm Mikuni - Gas +$26

 

Select Camshaft

CL1- No Charge
Dyno 275 (Large tracks)
230U 0207 ( for small tracks) +$13

230U Marine +$13

 

Select Misc Options
 Add Header $26
Add Muffler & Clamp $45
      

Total Cost            

STAGE 4+ KIT

 New for 2011, our Stage 4+ kit replaces our previous stage 4 to 9 kits. The new 4+ kits allows you to customize a kit for your application. The 4+ kit starts with package similar to that of the stage 3 kit but adds a Ported and Milled Head, stainless valves, billet rockers, and a serious cam package. Options include everything from roller rockers to stroker kits. This kit will allow you to build a motor in excess of 20+

  Nouveau pour 2011, notre Kit 4+ remplace notre étape précédente de 4 à 9 kits. Les 4 nouveaux kits+ vous permet de personnaliser un kit pour votre application. La base du kit 4+  est similaire à celle de l'étape du kit 3, mais un ''porting'' et un planage de tête ont été ajouté, valve  inox, rockers billettes, et une sélection de cames plus performants. Les options comprennent tout les ''roller rocker" et des "crankshat" stroké. Ce kit vous permettra de construire un moteur à plus de 20hp

Stage 4+  Kit $779

Includes

  • Race/Open Air Filter & Adapter,

  • Bored GX200 Carb

  • Ported & Milled Honda Head)

  • 1.2 Billet Rocker Arms

  • Chrome Moly Pushrods

  • Stud Kit

  • 26 lb Springs,

  • Lash Caps

  • 8 degree Timing Key,

  • Small Fan

  • Gasket Kit

  • .020 Billet Rod (not shown in picture)

  • Billet Guide plate

  • Choice of Compression Ratios

  • Choice of Cams

  • Optional Long Rod

  • Optional Roller Rockers

  • Optional Aluminum Flyhweel

  • Optional Crankshaft

  • Optional Stroker Kit

 

Up to 20+ hp depending on combination

Jusqu'à 20 hp tout dépendant des combinaisons

(Some Parts not Shown)

  

 STAGE 4 HOP KIT ORDER FORM

Select Options below and click button to add to shopping cart

Select Engine Type

Honda GX200 or yellow Clone $779

  Blue Clone $779

Honda GX160 $779

 

Select Valve Size

  25mm Intake, 24mm Exhaust

27.5mm Intake, 24mm Exhaust +$26

29mm Intake, 25mm Exhaust +$120

 

Select Carb Size

  Bored Carb - gas

Bored Carb - Methanol +$26

GX390 - Gas +$40

GX390 - Methanol +$52

  22mm Mikuni - Gas +$26

   24mm Flat Slide Mikuni - Gas +$170

28mm Flat Slide Mikuni - Alky +$185

 

Select Camshaft

(see GX200 race parts for descriptions)

252 0207

252 0607

252 Marine

274 0207

274 0607

274 1007

285 0607

307 0807

 

Valve Spring

Single Spring

Dual Springs +$26.00

 

Compression ratio (approximate GX200)

9 to 1

10 to 1

10.5 to 1

11 to 1

11.5 to 1 +$65

12.0 to 1 +$65

12.5 to 1 +$65

For higher compression ratios, select flat top pistons.

 

Piston & Rings

(Note: Flattops add approx 1.5 point compression)

  None $0

T2 Flattop +$52

T2 Lightweight Flattop +$78

T3 Dished +$52

T3 Lightweight Dished +$78

T3 Lightweight Flattop +$78

Wiseco Forged (adds long rod) $150

 

Crankshaft

  None $0

OEM Honda +$105

OEM Honda, Balanced +$234

.060 Stroker, Unbalnaced +$260

.060 Stroker, Balanced +$390

.175 Billet Stroker +$488

(includes Wiseco Piston)

 

Select Misc Options
 Roller Rockers $205
Aluminum Flywheel $125

      

Total Cost     

GX120 HOP UP KITS / ENSEMBLES DE PERFORMANCE
  Soon / Bientôt

GX270 HOP UP KITS / ENSEMBLES DE PERFORMANCE
  Soon / Bientôt
Pictures are for reference only. / Les images sont pour référence seulement