|
All parts are genuine Honda unless otherwise specified.
OEM HONDA PARTS FOR
GX160/200'S
In
some cases, New "Take Off" Parts
are
shipped, chick here for more information |
|
BEARINGS
BLOCKS
BOLTS
CAMSHAFTS
CARBURETORS
CRANKSHAFTS
ELECTRIC START KITS
EMULSION TUBES
FLYWHEELS & FANS
GASKETS
HEADS,
CYLINDER
IGNITION
JETS
PISTONS
PUSHRODS REBUILD
KITS
RECOILS
RINGS
ROCKER ARMS RODS,
CONNECTING
SEALS &
PLUGS
SHORT-BLOCKS
SHROUDS
SPRINGS TIMING
KEYS
VALVES
VALVE COVERS
VALVE GUIDES
VALVE TRAIN COMPONENTS
WRISTPINS & CLIPS |
|
|
|
BEARINGS |
|
|
 |
|
|
|
Bearing, Case, GX160/200, NTN or Equivalent, Japan |
160BEARING |
$27.60 |
|
Bearing, Case, GX160/200, Special Race - loose Free Spinning, These are OEM
bearings that have had the Balls and race ground for an extra .001" to .002"
clearance. This helps to free up the crank, eliminate any bind, and spin
free. |
160FREEBEARING |
$48.00 |
|
BLOCKS
(includes side cover, bolts and gov
assembly. Bearings and seals not included. |
|
|
 |
|
|
|
Block, GX160, HX2, New take off |
160 HX2 Block |
$240.00 |
|
Block, GX160, QX2/QXE2, New take off |
160 QX2 Block |
$220.00 |
|
Block, GX200, New take off |
200 Block |
$240.00 |
|
Block, 6.5 Clone (includes bearings and seals) |
|
CLONEBLOCK |
$90.00 |
|
We also have new Honda blocks available, please e-mail for information |
|
BOLTS |
|
|
 |
|
|
|
|
|
|
|
Bolt Kit, OEM, GX160/200 - Stock OEM Honda bolts. Includes Head, Side
Cover, Shroud, & valve Cover Bolts. New take off bolts |
160BOLTKIT |
$15.50 |
|
Bolt Kit, OEM, GX160/200 - Stock OEM Honda Head and Side Cover bolts bolts
(shroud and valve cover bolts not included). All bolts are new in package
genuine Honda. |
160BOLTKITNEW |
$19.00 |
|
Bolt, Head, GX160/200, OEM Honda, each |
 |
1436591 |
$1.75 |
|
Bolt, Side Cover, GX160/200, OEM Honda, each |
 |
2751725 |
$1.50 |
|
Bolt, Coil, GX120/160/200 OEM Honda, each |
 |
0748111 |
$2.30 |
|
Bolt, Valve and Side Cover, GX120/160/200 OEM Honda, each |
 |
0636845 |
$1.55 |
|
Stud, Carb GX120/160/200 OEM Honda, each |
|
4588323 |
$5.25 |
|
Stud, Exhaust GX120/160/200 OEM Honda, each |
|
1431097 |
$3.75 |
|
CAMSHAFTS |
| |
 |
|
|
|
Camshaft, GX160 |
1929611 |
$119.50 |
|
Camshaft, GX200 |
4742920 |
$119.50 |
|
Camshaft, GX390 |
5680988 |
$159.50 |
|
Lifter, GX120 & GX160 |
 |
5181383 |
$11.50 |
|
Lifter GX200 |
4742946 |
$14.50 |
|
CARBURETORS
& PARTS (Note: Jets are in separate
section) |
|
|
 |
|
|
|
Carburetor, GX 160 |
5152491 |
$90.00 |
|
Carburetor, GX 200 (Thai Z0V BE64A) |
7351869 |
$79.00 |
|
Carburetor, GX 200 (Japan ZL0 BE64B) |
5148101 |
$99.00 |
|
Carburetor, GX 200 CLONE (Not OEM Honda) |
CLONECARB |
$46.00 |
|
Carburetor, GX 340 |
3442225 |
$88.00 |
|
Carburetor, GX 390, Japan, BE85B |
5244827 |
$88.00 |
|
Carburetor, GX 390, Thai, BE85Q |
7689896 |
$57.00 |
|
Air Bleed Screw Carb (Idle Mixture screw) |
 |
4219879 |
$17.00 |
|
Bowl Set, Carburetor |
 |
2464287 |
$25.00 |
|
Float Assembly, Carb |
|
7346596 |
$24.65 |
|
Needle Assy (Float Valve) |
|
1441476 |
$24.65 |
|
Hose, Fuel, Roll |
|
2380566 |
$47.00 |
|
Insulator GX160 |
 |
1427137 |
$18.00 |
|
Insulator GX200 |
|
$18.00 |
|
Choke Lever |
 |
|
$7.50 |
|
Governor Rod |
 |
|
$4.00 |
|
Rebuild Kit, Carb rebuild (includes o rings and seals),
GX120, 160, & GX200 Carbs |
 |
3477171 |
$15.00 |
|
CRANKSHAFTS |
| |
 |
|
|
|
|
|
|
Crankshaft GX 160 QX2 (3/4" Shaft) |
7351539 |
$95.00 |
|
Blueprinted and Clearanced (.003-.004") |
$122.50 |
|
Crankshaft GX 200 HX2 (for 6 to 1 gear box) |
7492770 |
$175.00 |
|
Blueprinted and Clearanced (.003-.004") |
$225.00 |
|
Crankshaft GX 200 QX2 (3/4" Shaft) |
7351638 |
$130.00 |
|
Blueprinted and Clearanced (.003-.004") |
$172.00 |
|
Crankshaft GX 160 HX2 (for 6 to 1 gear box) |
5425459 |
$175.00 |
|
Blueprinted and Clearanced (.003-.004") |
$219.00 |
|
Crankshaft GX 200 QX2 (3/4" Shaft) - CLONE |
 |
CLONECRANK |
$67.00 |
|
Blueprinted and Clearanced (.003-.004") |
$106.00 |
|
ELECTRIC START KITS
FOR GX200s (&160s) - Limited Availability on these Kits |
|
Genuine Honda Electric Start Kit for GX160s and 200s
(Fan cover requires minor trimming on 200). Includes all parts needed
including charging coil. All parts are Genuine Honda. No Instructions |
 |
ELECSTRKIT |
$348.00 |
|
Clone Electric Start Kit for GX160s and 200s (Fits
clones and Hondas). No hardware or instructions |
 |
CLONEELECSTRKIT |
$186.00 |
|
EMULSION TUBES |
| |
 |
|
|
|
Emulsion Tube GX160 |
|
$18.00 |
|
Emulsion Tube GX140 |
|
$18.00 |
|
Emulsion Tube GX200 |
|
$18.00 |
|
FLYWHEELS & FANS |
|
Flywheel, GX120 Tier 3 (QMA 2008 Rules) |
 |
8582017 |
$112.50 |
|
Flywheel GX160/GX200 (Specify), Limited Quantity |
 |
NEW TAKE OFF |
$75.00 |
|
USED AND/OR REMANUFACTURED |
$30.00 |
|
Flywheel, GX160/GX200 with Magnets for Lighting Coil, Available with or
without ring gear for electric start. Requires 3A or 10 A coil for charging
system |
 |
Without ring gear - 5308440 |
$129.00 |
|
With ring gear for starter - 5308457 |
$145.00 |
|
Coil, Charging, Use with above flywheel |
 |
3 Amp 8673972 |
$50.00 |
|
 |
10 Amp (Dual Coils) 2534907 |
$137.00 |
|
Nut, Fly Wheel |
 |
442038 |
$6.00 |
|
Fan, 160/200 |
 |
1428051 |
$13.00 |
|
Fan, GX120 |
1428044 |
$19.00 |
|
Key, Flywheel |
 |
348433 |
$2.50 |
|
Pulley (Cup), Starter, New style |
 |
GX120 New Style |
$21.00 |
|
GX160 New Style |
$21.00 |
|
GX200 New Style |
$21.00 |
|
Pulley (Cup), Starter, Old style, GX160 |
3683943 |
$25.00 |
|
GASKETS |
|
Gasket Exhaust (fits GX120/160/200) |
 |
3683745 |
$5.00 |
| |
 |
|
|
|
Gasket, 160/200 Case (green) |
4723144 |
$6.00 |
|
Gasket, 200 Case (Tan) |
4917720 |
$14.00 |
|
Gasket, Carb |
 |
3683554 |
$1.50 |
|
|
 |
|
|
|
Gasket, Insulator GX160/GX200 |
3683547 |
$2.50 |
|
) |
 |
|
|
|
Gasket, Engine Kit 160 (GENUINE HONDA) |
5177738 |
$33.00 |
|
Gasket, Engine Kit 200 (GENUINE HONDA) |
5148085 |
$33.00 |
|
Gasket, Head GX160 |
 |
3683380 |
$14.00 |
|
Gasket, Head GX160, OEM Honda, Special Thin, ~ .041 to .042 thickness |
|
3683380-Thin |
$26.00 |
|
Gasket, Head GX160, OEM Honda, Special Thin, ~ .038 to .039 thickness (Not
QMA Legal) |
3683380-.38 |
$26.00 |
|
Gasket, Head GX200 |
 |
4742763 |
$19.00 |
|
Gasket (Seal), Air cleaner to Carb |
 |
2534055 |
$6.50 |
|
Gasket, Valve Cover |
 |
1426527 |
$4.25 |
|
HEADS, CYLINDER |
|
|
 |
|
|
Head Cylinder GX200, OEM Honda, New Take Off, Bare |
TO200HD |
$125.00 |
|
Head Cylinder GX200, OEM Honda, New in Box, |
8121477 |
$215.00 |
|
Head Cylinder GX160, E-Spec, 18 cc, OEM Honda, Japan, New in box or New
Take Off, Bare |
8140626 |
$170.00 |
|
Head Cylinder GX160, E-Spec, 18 cc, OEM Honda, Z0T, Thailand, New in box
or New Take Off, Bare |
7351349 |
$150.00 |
|
Head Cylinder GX160, Old Style 14cc , OEM Honda, New |
6779243 |
$185.00 |
|
Clone Cylinder Head for 5.5/6.5 (GX200) |
|
14 cc Clone Head |
$80.00 |
|
22 cc Clone Head |
$80.00 |
|
IGNITION (Including
Timing Keys) |
|
Cap, Spark Plug, OEM Honda, Style may Vary |
 |
7346927 |
$15.75 |
|
Coil (fits GX120/160/200), Genuine Honda |
 |
8582009 |
$42.00 |
|
Spark Plug, Split Fire SF6*, For Honda |
 |
Splitfire |
$7.50 |
|
Spark Plug, Platinum BOSCH +4, For Honda |
 |
BOSCH |
$9.75 |
|
Spark Plug, NGK BPR6ES (OEM Honda) |
 |
NGK6ES |
$4.00 |
|
JETS |
|
Jet, 60 (0.60 mm, .0236") |
 |
|
$7.50 |
|
Jet, 62 (0.62 mm, .0244") |
6010227 |
$7.50 |
|
Jet, 65 (0.65 mm, .0256") GX120s QMA Max |
4313375 |
$7.50 |
|
Jet, 68 (0.68 mm, .0268") |
5519996 |
$7.50 |
|
Jet, 70 (0.70 mm, .0276") |
|
$7.50 |
|
Jet, 72 (0.72 mm, .0283") |
|
$7.50 |
|
Jet, 75 (0.75 mm, .0295") |
6056147 |
$7.50 |
|
Jet, 78 (0.78 mm, .0307") |
6056154 |
$7.50 |
|
Jet, 80 (0.80 mm, .0307") |
5947122 |
$7.50 |
|
Jet, 82 (0.82 mm, .0323") BEST FOR GX160s, QMA Max |
5947130 |
$7.50 |
|
Jet, 85 (0.85 mm, .0335") |
5947148 |
$7.50 |
|
Jet, 88 (0.88 mm, .0346") |
5945555 |
$7.50 |
|
Jet, 90 (0.90 mm, .0354") GX200s in Hot Weather |
5947155 |
$7.50 |
|
Jet, 92 (0.92 mm, .0362") GX200s in Cold Weather, All
Clone Carbs |
5947163 |
$7.50 |
|
Jet, 95 (0.95 mm, .0374") Bored Carbs |
6062665 |
$7.50 |
|
Jet, 98 (0.98 mm, .0386") |
4300943 |
$7.50 |
|
Jet, 100 (1.00 mm, .0394") |
4310850 |
$7.50 |
|
Jet, 102 (1.02 mm, .0402") GX390 Carbs on GX200s |
4723854 |
$7.50 |
|
Jet, 105 (1.05 mm, .0413") |
6123335 |
$7.50 |
|
Jet, 125 (1.25 mm, .0492") GX200s on Methanol on Std
Carbs |
125JET |
$7.50 |
|
Jet, 135 (1.35 mm, .0531") GX200s on Methanol on Bored
Carbs |
135JET |
$7.50 |
|
Jet, 160 (1.60 mm, .0630") Use for adjustable Jets |
160JET |
$7.50 |
|
Drilled Jets, These are clone or Honda
jets that have been drilled to the selected size. They do not flow as well
as OEM jets. Select one size larger than you would use for a OEM Jet. |
|
Select Size |
$5.00 |
|
Pilot Jet, #35 (GX120 & GX160) |
 |
1441609 |
$17.75 |
|
Pilot Jet, #38 |
3353075 |
$17.75 |
|
Pilot Jet, #40 |
3505369 |
$17.75 |
|
Pilot Jet, #45 (GX200) |
2060465 |
$17.75 |
|
Pilot Jet, #60 - Use Methonal Applications |
ALKYPILOT24 |
$24.00 |
|
PISTONS
(for GX200 Flattops, see
Raceparts) |
|
Piston, GX160, Flat Top, ZH8, Tier 2, Std |
 |
6837512 |
$33.75 |
|
Piston, GX160, Flat Top, ZH8, Tier 2, Oversize |
|
|
|
Piston, GX160, Flat Top, ZH8, Tier 3, Std |
|
8589582 |
$33.00 |
|
Piston, GX160, Flat Top, ZH8, Tier 3, .25 (.010") |
8587693 |
$35.00 |
|
Piston, GX160, Flat Top, ZH8, Tier 3, .50 (.020") |
8587719 |
$35.00 |
|
Piston, GX160, Flat Top, ZH8, Tier 3, .75 (.030") |
8587727 |
$35.00 |
|
Piston, GX160, Dished, ZH8 , Tier 2 |
 |
160OSPIST |
$35.00 |
|
Piston, GX160/GX200, Flat top, Z0T, Tier 2
For oversize go to race parts
Click Here |
|
7351414 |
$31.25 |
|
Piston, GX200, OEM Dished, ZL0, Tier 2, Std |
|
|
$50.00 |
|
Piston, GX200, OEM Dished, ZL0, Tier 2, Oversize |
Call or E-Mail |
|
Piston, GX200, OEM Dished, ZL0, Tier 3 Std |
|
8589103 |
$32.50 |
|
Piston, GX200, OEM Dished, ZL0, Tier 3 .25 (.010") |
8589111 |
$35.00 |
|
Piston, GX200, OEM Dished, ZL0, Tier 3 .50 (.020") |
8589129 |
$35.00 |
|
Piston, GX200, OEM Dished, ZL0, Tier 3, .75 (.030") |
8589137 |
$35.00 |
|
Piston, 6.5 Clone, New take Off |
|
|
$7.50 |
|
PUSHRODS |
|
|
 |
|
|
|
Pushrod 160/200, each |
OEM HONDA 3352655 |
$8.00 |
|
CLONE |
$4.00 |
|
REBUILD KITS -
GX160 |
|
Rebuild Kit, GX160 Standard (Tier 2) - Includes New Valves, Piston Rings,
Valve Springs (GX140), and Gasket Set All 100,% OEM Honda Parts |
 |
160REKITSTDT2 |
$100.00 |
|
Rebuild Kit, GX160 Standard (Tier 3) - Includes New Valves, Piston Rings,
Valve Springs (GX140), and Gasket Set, All 100% OEM Honda Parts |
160REKITSTDT3 |
$101.00 |
|
Rebuild Kit, GX160 Deluxe (Tier 2) - Includes New Valves, Piston Rings,
Valve Springs (Choice of Stock or GX140), Gasket Set, Piston, Wristpin, and
Oil Seals , All 100% OEM Honda Parts |
 |
160REKITDLX |
$152.00 |
|
Rebuild Kit, GX160 Deluxe (Tier 3) - Includes New Valves, Piston Rings,
Valve Springs (Choice of Stock or GX140), Gasket Set, Piston, Wristpin, and
Oil Seals , All 100% OEM Honda Parts |
160REKITDLX |
$146.00 |
|
REBUILD KITS - GX200 |
|
Rebuild Kit, GX200 Standard (Tier 2) - Includes New valves, Piston Rings,
Valve Springs (883), and Gasket Set , All 100% OEM Honda Parts |
|
200REKITSTDT2 |
$102.00 |
|
Rebuild Kit, GX200 Standard (Tier 3) - Includes New valves, Piston Rings,
Valve Springs (883), and Gasket Set , All 100% OEM Honda Parts |
200REKITSTDT3 |
$100.00 |
|
Rebuild Kit, GX200 Deluxe (Tier 2)- Includes New valves, Piston Rings, Valve
Springs (883), Gasket Set, Dished Piston, Wristpin, and Oil Seals , All
100% OEM Honda Parts |
|
200REKITDLXT2 |
$169.00 |
|
Rebuild Kit, GX200 Deluxe (Tier 2 Flat Top)- Includes New valves, Piston
Rings, Valve Springs (883), Gasket Set, Flat Top Piston, Wristpin, and Oil
Seals , All 100% OEM Honda Parts |
200REKITDLXT2FT |
$150.00 |
|
Rebuild Kit, GX200 Deluxe (Tier 3)- Includes New valves, Piston Rings, Valve
Springs (883), Gasket Set, Dished Piston, Wristpin, and Oil Seals , All
100% OEM Honda Parts |
200REKITDLXT3 |
$147.00 |
|
RECOILS |
|
Recoil GX120/GX160/GX200 Red, New design w/black pulley, Starter cup
required if replacing old design (white pully) or using on a clone |
|
TORECOIL |
$44.99 |
|
Recoil GX120/GX160/GX200 QTY OF 3 |
TORECOILX3 |
$101.99 |
|
Recoil, GX120 and Starter Cup (New design) |
TORECOIL120WC |
$41.99 |
|
Recoil, GX160 and Starter Cup (New design), Can use on 200 if spacer removed. |
TORECOIL160WC |
$41.99 |
|
Recoil GX200, Spacer (If available), and Starter Cup (New design) |
TORECOIL2000WC |
$41.99 |
|
Recoil GX120/GX160/GX200 Red, Style with
White Pulley - Limited Availability |
|
TORECOILOLD |
$44.99 |
|
Yellow CLONE Recoil Assembly |
|
TORECOILClone |
34.99 |
|
Recoil GX340/GX390/GX610/GX620 |
 |
TORECOIL390 |
$44.99 |
|
RINGS |
|
Ring Set GX160/200 Tier 2, Std |
 |
6854954/7351364 |
$30.00 |
|
Ring Set GX160/200 Tier 2, .010 (.25) |
7351372 |
$32.00 |
|
Ring Set GX160/200 Tier 2, .020 (.50) |
7351380 |
$32.00 |
|
Ring Set GX160/200 Tier 2, .030 (.75) |
7351398 |
$32.00 |
|
Ring Set GX160/200 Tier 3, Std |
8587602 |
$26.00 |
|
Ring Set GX160/200 Tier 3, .010 (.25) |
8587628 |
$27.00 |
|
Ring Set GX160/200 Tier 3, .020 (.50) |
8587644 |
$27.00 |
|
Ring Set GX160/200 Tier 3, .030 (.75) |
8587669 |
$27.00 |
|
ROCKER ARMS |
|
Rocker Arm, OEM Honda (GX120, 160, 200), each |
 |
1426824 |
$6.00 |
|
Rocker Arm, OEM Honda Cryogenic Treated, Use with HD Springs, Stronger than
stock, each |
1426824CRYO |
$13.00 |
|
Rocker Arm, Low Friction with Pivot. These are OEM Rocker Arms and Pivots
that have been lapped and treated to reduce friction. Undetectable, each |
 |
OEM HONDA |
$26.00 |
|
CLONE (Includes studs and nut) |
$26.00 |
|
Rocker Arm, Clone (5.5, 6.5), each |
|
CLONE RA |
$3.50 |
|
RODS, CONNECTING |
|
|
|
|
|
|
Rod, Connecting GX160/200, OEM Honda, New Take off |
|
$36.00 |
|
Rod, Connecting GX160/200, ZH8, OEM Honda, new in package |
1426600 |
$54.50 |
|
Rod, Connecting GX160/200, CLONE, New Take Off |
|
$7.50 |
|
SEALS & OIL PLUGS |
|
|
 |
|
|
|
|
|
|
|
Oil Seal, 160/200, Crank Side |
0636936 |
$6.50 |
|
Oil Seal, 160/200, Flywheel Side |
0636936 |
$6.50 |
|
Oil Seal, Gearbox |
636936 |
$6.50 |
|
Oil Plug, Grey |
 |
4500146 |
$5.50 |
|
Oil Pug, Black |
 |
4497921 |
$5.50 |
|
Drain Plug |
 |
1431246 |
$2.50 |
|
Drain Plug Washer |
 |
1436583 |
$1.50 |
|
SHORT BLOCKS |
| |
 |
|
|
| |
|
|
|
Short Block - GX160 HX2 (New block w/piston, crank, rings, cam, lifters (does
not include flywheel or fan) |
SBGX160H2 |
$310.00 |
|
Short block - GX160 QX2 (New block w/piston, crank, rings (does
not include Cam, flywheel or fan) |
SBGX160Q2 |
$199.99 |
|
Short block - GX200 HX2 (New block w/piston, crank, rings, cam, lifters (does
not include flywheel or fan) |
SBGX200HX |
$349.00 |
|
Short block - GX200 QX2 (New block w/piston, crank, rings, cam, lifters (does
not include flywheel or fan) |
SBGX200Q2 |
$319.99 |
|
SHROUDS |
| |
 |
|
|
|
Fan Shroud, GX160 Red |
TOSHRD160 |
$46.00 |
|
Fan Shroud, GX200 Red (Will work on 160's) |
TOSHRD200 |
$46.00 |
|
Fan Shroud, GX160 Black |
 |
TOSHRD160BK |
$50.00 |
|
SPRINGS, VALVE |
|
Valve Spring GX120160/200 OEM, ea (Note these are stock springs for 120s,
160s, and 200s), Sold in Pairs |
 |
3683489 |
$7.50 |
|
Valve Spring GX120/160/200 New Take off Springs, Sold in Pairs |
3683489TO |
$2.60 |
|
Valve Spring GX120, Bag of 10 |
3683489-10 |
$31.25 |
|
Valve Spring GX120 CRYOGENIC TREATED
Last up to 5 times longer than stock. By maintaining pressure, Lap times are
improved., Sold in Pairs |
CRYOSPRING |
$13.00 |
|
Valve Spring GX140, ea (Use for GX160s - QMA legal), Sold in Pairs |
|
1426972 |
$7.75 |
|
Valve Spring GX140, Cryo Treated, Sold in Pairs |
1426972C |
$15.60 |
|
Valve Spring GX140, Bag of 10, Sold in Pairs |
1426972-10 |
$31.25 |
|
Valve Spring 18lb (883) |
|
|
|
Valve Springs, Clone 6.5 New Take Off, Sold in Pairs |
|
|
$1.50 |
|
SWITCHES |
|
Switch, On-Off with Oil Cut Off Module, All Hondas with recoil Only Start |
 |
TOSWMAN |
$2.99 |
|
Switch, Starter, Control Box GX240/270/340/390 |
 |
TOSWELEC |
$31.25 |
|
VALVES |
|
|
|
|
|
|
Valve, Exhaust GX160/200, OEM Honda |
3683463 |
$26.00 |
|
Valve, Exhaust 6.5 Clone, New Take Off |
|
$5.00 |
|
Valve Intake GX160/200, OEM Honda |
3683455 |
$18.25 |
|
Valve Intake 6.5 Clone, New Take Off |
|
$4.00 |
|
VALVE COVERS |
|
Valve Cover with Pulse Fitting |
 |
VCWITHPULSE |
$18.75 |
|
Valve Cover, Chrome Plated, Genuine Honda |
 |
CPVC |
$25.00 |
|
Cover, Valve Cover w/Nipple (fits GX120/160/200), OEM Honda |
 |
4728457 |
$13.00 |
|
Valve Cover GX120/GX160/GX200, Take Off |
 |
TOVALCOV |
$10.00 |
|
VALVE GUIDES |
|
Valve Guide, Exhaust (Must be reamed after installation) |
 |
1899848 |
$8.75 |
|
Valve Guide, Intake (Must be reamed after installation) |
4165874 |
$8.75 |
|
VALVE TRAIN
COMPONENTS |
|
Guide Plate, Push Rod, OEM Honda (Note: Required on Clone motors to use 1.2
or 1.3 Rocker Arms) |
 |
1899947 |
$4.00 |
|
Retainer, Intake Valve |
 |
14771-ZE1-000 OEM HONDA |
$8.50 |
|
CLONE |
$4.50 |
|
Retainer, Exhaust Valve |
 |
OEM HONDA 14773-ZE1-000 |
$8.50 |
|
CLONE |
$4.50 |
|
Rotater, Exhaust Valve (Lash Cap) |
 |
OEM HONDA 1427004 |
$4.50 |
|
CLONE |
$3.50 |
|
Stud, Rocker Arm
(Note: these will not interchange between Honda and Clones) |
 |
OEM HONDA 1756964 |
$6.75 |
|
CLONE |
$4.00 |
|
Nut, Rocker Arm
(Note: these will not interchange between Honda and Clones) |
 |
OEM HONDA 1431287 |
$3.5 |
|
CLONE |
$2.00 |
|
Pivot, Rocker Arm
(Note: these will not interchange between Honda and Clones) |
 |
4300901 OEM HONDA |
$5.75 |
|
CLONE |
$3.50 |
|
WRISTPINS & CLIPS |
|
Wristpin GX160/200 |
 |
1426584 |
$9.00 |
|
Clip, Piston Pin (18MM), GX160/200 |
 |
2539120 |
$1.50 |
|
Part/Model
numbers are for reference only and are subject to change. Actual part may
have a different number, however it will be latest available part and will
match description. If you require an exact part number (i.e. for class or
rule requirements), please e-mail. |
|
In some cases, New "Take Off" Parts may be substituted (particularly
for Cams, Cranks, Sungear, and other hard to get items). In these cases, the
take off parts are unused and fully guaranteed, with the only difference
being lack of factory packaging. If you require parts in factory packaging
please send a e-mail.
Pictures are for reference
only. |